CM Booster
Application
- CM Booster self priming
Features
- Designed to have good suction lift capabilities, the CM Booster Self-Priming is able to draw water up to 4 metres vertically below the level of the pump, which makes it perfect for pumping water from below ground tanks or shallow wells.
CMB With PM1
Application
- GRUNDFOS CMB PM1 BOOSTER
Features
- Grundfos CMB PM 1 Booster is ideal for instant water heater showers while providing strong, constant water pressure around your house and garden. The CMB PM 1 Booster is a compact, quiet yet powerful multistage pump with built-in pressure control and maintenance free design.
CM Twin Booster
Application
- Pressure boosting for home and gardening
- water supply for agriculture and irrigation
- transfer and pressure boosting in break tank and rainwater applications
- water supply from shallow wells
- a twin solution for larger applications, such as apartment buildings, hospitals, hotels and small industrial plants.
Features
- The boosters are suitable for pumping clean, thin, nonaggressive and non-explosive liquids without solid particles or fibres. Examples:
- Drinking or tap water
- rainwater and condensate
- groundwater
- river and lake water
- boiler feed water and district heating water
- chlorinated water
- softened water
- washing and cleaning.
- The pumps must not be used for transfer of diesel oil or other oil-containing liquids. Sand and other impurities in the water can cause wear to the pump.
SCALA1
Application
- Taps and showers in the home
- Garden and lawn irrigation
- Greenhouses
- Irrigation
- Car wash
- Produce (fruit and vegetable) section in supermarkets
Features
- Designed for pressure boosting in domestic installations, use SCALA1 for pumping from a roof tank, break tank or ground tank. It is also ideal for water supply from shallow wells (less than 8 m) and for pressure boosting from city mains water.
SCALA2
Application
- Boosting from mains: increases the water pressure delivered by city mains
- Boosting from tanks: increases water pressure from roof tanks, break tanks and ground tanks, including rainwater tanks
- Boosting from wells: pumps water from a depth of up to 26 feet (8 meters)
- Indoor and outdoor installation: X4D IP Rating
Features
- Perfect water pressure: Intelligent pump control adjusts operation automatically
- Low noise: 44 dB(A) in typical use
- Easy selection: One variant for all residential boosting needs
- Easy installation: Compact, all-in-one solution, plug-and-pump
- Easy to operate: User-friendly control panel
- Reliable operation: Dry-running protection, anti-cycling
- Long lifetime: Quality-tested to perfection, maintenance-free
- Highly efficient with ECM motor
- Self priming and suitable for both indoor and outdoor applications
CME BOOSTER
Application
- PRESSURE BOOSTERS THE CME BOOSTER
Features
- Cruise Control always constant pressure
- All in one system plug & pump
- Low noise operation < <= 55 dB(A)
- Dry run & overload protection
- 2 year warranty
CMBE Twin Booster
Application
- The compact Grundfos CMBE TWIN Booster is suitable for clean water supply and pressure boosting in domestic and commercial applications. The CMBE TWIN Booster keeps a constant pressure in the pipe system and is mainly used in places such as:
- two-family houses
- cluster homes
- blocks of flats
- schools
- small hotels
- small office buildings
- small industrial plants and businesses
- hospitals
- agriculture and irrigation.
Features
- Constant pressure via integrated speed control
- cascade control and pump alternation
- dry-running protection
- compact
- robust, stainless steel design
- easy installation
- low energy consumption
- noise level below 55 dBA and even lower at controlled speed.
UPA
Application
- UPA booster pumps are designed for pressure boosting of domestic water supplied from an external source in residential homes.
- UPA booster pumps are used in open systems and can also be connected directly to the water main.
Features
- Flexibility: Installation in existing systems.
- Comfort: Low-noise operation.
- User friendliness: Plug and play.
- Reliability: Proven Grundfos quality.
- Energy-efficiency: High-efficiency PM technology.
- UPA 15-160 consumes up to 87 % less electrical power than a conventional constant-speed booster.
- Corrosion-resistant: Cataphoresis-coated pump housing.
JP 3-42 PM Start
Application
- single- and two-family houses, boosting the pressure of water coming from a break tank, roof tank or a well
- garden irrigation
- car wash
- small-scale agriculture and horticulture
- light commercial applications
- pool cleaning (AISI 316 variant only)
- low-content salt water (AISI 316 variant only).
Features
- Self-priming, featuring a suction lift of up to 8 m
- robust design and corrosion-free materials for a long lifetime
SQE Submersible Booster
Application
- Domestic ground water intake Domestic water pressure boosting Ground water intake
Features
- Grundfos SQE pumps are compact submersible pumps, designed for constant pressure applications within domestic groundwater supply for private housing, small waterworks, and small irrigation systems.
